Filter
Top Products
SY-P4I845PE Lite
Quick Start Guide
13
Hardware
Installation
Step 4. Install expansion cards
The motherboard has 1 AGP slot and 6 PCI slots.
1. Read the instruction document of the related expansion card before inserting the expansion
card into the computer.
2. Press the expansion card firmly into expansion slot in motherboard.
3. Be sure the metal contacts on the card is seated in the slot.
4. Replace the screw to secure the slot bracket of the expansion card.
5. Install related driver from the operating system.
Note1: Only AGP card with 1.5 volts can be used in this M/B. Using 3.3 volts AGP card
will damage your motherboard. For AGP card voltage specification, please check the
AGP card manual or contact your AGP card manufacturer.
Note2: When you use an AGP add-in card on the P4I845PE Lite mainboard the
onboard VGA will automatically be disabled. It’s not possible to use onboard VGA and
an AGP add-in card at the same time. For this versions (P4I845PE Lite) note that when
using a PCI VGA card, make sure that the init display setting is set to PCI slot instead
of onboard/AGP. Also, note that when using a PCI VGA card the on chip VGA setup
option can be used to disable onboard VGA.