Filter
Top Products
SY-P4I845PEISA/GEISA Quick Start Guide
10
Hardware
Installation
Step 2. Configure Memory
P4I845PEISA/GEISA support PC2100 & PC2700, non-ECC and non-registered module.
The largest memory capacity possible is 2GB.
On this motherboard (PEISA/GEISA),
DRAM speed can be set independent from the CPU front side bus speed.
A maximum of
2 pcs. Double-sided module can be used at the same time.
Memory Configuration Table
Number of Memory Modules DDR1 DDR2
RAM Type
DDR RAM
Memory Module Size (MB)
128 / 256 / 512 MB / 1GB
Note:
System must have a 533MHz FSB CPU to have PC2700 memory support.
Step 3. Connect cables, case wires, and power supply Install
expansion cards
This section tells how to connect internal peripherals and the power supply to the
Motherboard.
The internal peripherals consist of IDE devices (HDD, CD-ROM), Floppy Disk Drive,
Chassis Fan, Front Panel Devices (ACPI LED, Internal Speaker, Reset Button, IDE LED,
and KeyLock Switch.), Wake-On-LAN card, VGA card, Sound Card, and other devices.
For more details on connecting internal and external peripherals to your new
SY-P4I845PEISA/GEISA Motherboard, please refer to SY-P4I845PEISA/GEISA
Motherboard User's Manual and Technical Reference online manual on the CD-ROM.