Filter
Top Products
SY-P4VDA
Quick Start Guide
9
Hardware
Installation
Step 4. Connect cables, case wires, and power supply
This section tells how to connect internal peripherals and the power supply to the Motherboard.
The internal peripherals consist of IDE devices (HDD, CD-ROM), Floppy Disk Drive, Chassis Fan, Front
Panel Devices (Internal Speaker, Reset Button, and IDE LED Switch.), Wake-On-LAN card, VGA card,
Sound Card, and other devices.
For more details on connecting internal and external peripherals to your new SY-P4VDA Motherboard,
please refer to SY-P4VDA Motherboard User's Manual and Technical Reference online manual on the
CD-ROM.
A. Connectors and Plug-ins
CPU Cooling Fan: CPUFAN Chassis Fan: CHAFAN1 Chassis Fan: CHAFAN2
Pin1 Pin2 Pin3 Pin1 Pin2 Pin3
Pin1 Pin2 Pin3
GND 12V SENSOR GND 12V SENSOR GND 12V None
MIC & LED Connector (J30)
Pin1 Pin2 Pin3 Pin4 Pin5 Pin6
AUDIO_L AUDIO_R MIC_OUT GND LAN_Active_LED_Cathode LAN_Active_LED_Anode
Standard IrDA (Infrared Device Header): SIRCON
Wake-On-LAN Header: JP10
Pin1 Pin2 Pin3 Pin4 Pin5 Pin1 Pin2 Pin3
VCC NC IRRX GND IRTX 5VSB GND MP-Wakeup
USB 3 USB 4
Pin1 Pin2 Pin3 Pin4 Pin5 Pin6 Pin7 Pin8 Pin9 Pin10
5VSB Data(-) Data(+) GND NC 5VSB Data(-) Data(+) GND GND
SMCARDCN
Pin1 Pin2 Pin3 Pin4 Pin5 Pin6 Pin7 Pin8 Pin9 Pin10 Pin11 Pin12 Pin13 Pin14
VCC NC NC NC Scrfet RST CLK NC NC Scrio GND Scrpres NC NC
CD -IN: CDIN2
Pin1 Pin2 Pin3 Pin4
Connect the CD Line-in cord from the CR-ROM device to the
matching connector CDIN2.
L G G R
Power LED
Pin1 Pin2 Pin3
VCC NC GND
Speaker
Pin1 Pin2 Pin3 Pin4
VCC NC NC Speaker out
HDD LED PWRBT RESET
Pin1 Pin2 Pin1 Pin2 Pin1 Pin2
LED Anode LED Cathode Power On/Off GND Power Good GND
Power On/Off: PWRBT
Connect your power switch to this header (momentary switch type).
To turn off the system, press this switch and hold down for longer than 4 seconds.
Power LED
Key Lock
Speaker
Reset PWRBT
A
CPI LED
HDD LED
++
+
+
_
_
_
_
11