Filter
Top Products
SY-V6BE+ Quick Start Guide
14
The SOYO CD
Click the Install Drivers button to display the list of drivers that can be installed on your mainboard. The
start-up program displays the drivers available for the SY-V6BE+ and the Windows version you use. For
Windows 95 four drivers will be listed (see ‘Driver Installation Menu’ below), for Windows 98 three drivers will
be listed (the ACPI drivers will be left out).
If you want to see all the drivers available on the SOYO –CD, click the Display all drivers on the SOYO
CD button. Do NOT install drivers that are not suitable for you board, otherwise your system may crash.
(Driver Installation Menu)
Select which driver you want to install and click
OK,
or click
Cancel
to return to the main
menu. When the installation program of a driver starts running the SOYO-CD will exit. After
finishing the installation, restart the SOYO-CD and install the next driver. We recommend
you to install all drivers, and to do so in the right sequence (top to bottom).
Note:
Once you have selected a driver, the system will automatically exit the SOYO CD to
begin the driver installation program. When the installation is complete, most drivers require
to restart your system before they can become active.
Install the drivers in sequence, starting with the VIA IRQ remapping utility.
After installing all drivers above, if you use Windows 95, first install the
USB supplement before installing the AGP driver that came with your
AGP card.
Please select the driver you want to install and click OK, You will have to
restart your system after installation. Only the drivers that are relevant
to your board are displayed initially.
VIA ACPI Driver
SOYO SpeedPro BusMaster Driver
VIA IRQ remapping utility
VIA VxD Driver
Cancel
Display all drivers
on the SOYO CD
OK
Driver Installation