Sprint Nextel U300 Modem User Manual


 
Section 2B Using Your USB Modem 9
Using Your Modem
ESN/MEID _____________________________________
Activation code _________________________________
Sprint Phone number____________________________
MSID _________________________________________
Account password ______________________________
Sprint User Name _______________________________
Attaching the Y-Extension Cable
Under most operating conditions, your device will
operate well when inserted into a single USB slot, and
you do not need to install the Y-extension cable. But in
some rare instances your USB modem may require
more power to operate due to poor signal strength. If
your computer displays a warning message that your
USB has exceeded the power limit, install the
Y-extension cable to supply additional power to the
USB modem.
1. Insert the two paired USB connectors into any
two USB slots on your computer.
2. Plug the USB modem into the other end of the
Y-extension cable.*
(* U.S. Patents pending by C-motech Co. Ltd. Of South Korea)
4. If activation was not successful, a message
window is displayed. For instructions on
activating your USB modem, see the user guide
(see “Viewing the User Guide” on page 10). Use
the spaces below to write down important
information related to the activation process and
your account.