Filter
Top Products
Introduction
This appendix contains instructions for using the Windows
Terminal communication application to connect to any one of
the TigerSwitch 16 models via the out-of-band Console port.
Make sure that the ASCII transfer parameters are set as follows:
• 8 bits
• no parity
• 1 stop bit
• 9600 (default) or 19.2 baud
• no flow control
In addition, be sure that:
• All data flow control parameters are turned OFF.
• Any parameters that would add characters to the download
file (such as line feeds) are turned OFF.
• The console speed of the switch corresponds to the
terminal setting.
Setting the Console Speed
To set the console speed on the switch:
1. At the Main Menu, type 4 to display the Utilities Menu.
2. At the Utilities Menu, type 1 to display the Console
Configuration Menu.
3. Type 1 and change the baud rate to the appropriate speed.
4. Type 2 to accept the new setting and make the change effec-
tive.
5. Change the Host data rate now.
SAMPLE CONFIGURATION
C-2