Star Micronics NP-415W Printer User Manual


 
30
28) Barcode print :<< GS k n Dn NUL >>
Code : < 1D >h + < 6B >h + n + Dn + < 00 >h * < 00n07 >h
Description : Selects barcode symbology and prints barcode.
* The next print start position is on the line head
* Select following barcode symbology with “n” value.
* Dn indicates the character code to be printed.
n (Hex) Barcode symbology
00 UPC-A
01 UPC-E
02 EAN-13 (JAN-13)
03 EAN-8 (JAN-8)
04 CODE 39
05 ITF
06 CODABAR
07 CODE128
* When there is data in the buffer this command is neglected.
* If character code Dn is not a printable character, following data after Dn will be treated
as normal data.
* If the print character numbers are fixed in the barcode symbology the input character
numbers should match to the print character numbers.
* If horizontal data exceed one line, the exceeded data cannot be printed.
29) Barcode width size select :<< GS w n >>
Code : < 1D >h + < 77 >h + n * < 02n04 >h
Description : Selects width of barcode
* Default value of “n” is [03]h.
30) Barcode height select :<< GS h n >>
Code : < 1D >h + < 68 >h + n * < 00 n FF >h
Description : Selects barcode height
* “n” shows the vertical dot number
* Default value of “n” is 162([A2]h).
31) Select of HRI character print position :<< GS H n >>
Code : < 1D >h + < 48 > h +n * < 00 n 03 >h
Description : Selects the print position of HRI characters in printing barcode.
* “n” has the following meaning.
n (Hex) Print position
00 No printing
01 Above barcode
02 Below barcode
03 Above and below barcode
* HRI characters are the characters selected by “HRI character style select”.
* Default value of “n” is [00]h.
32) Select of HRI character style :<<GS f n>>
Code : <1D>h+<66>h+n * < 00 n 01 >h
Description : Selects HRI character style in printing barcode
* “n” has the following meanings:
n (hex) Style
00 Font A
01 Font B
* Default value of “n” is [00]h.