Filter
Top Products
– 19 –
ENGLISH
7 Insert only the original (the upper
paper) into the slit of the auto cutter.
Insert the paper onto which you
wish to copy (the lower paper) be-
tween the platen and the auto cutter.
8 Pull on the edge of the paper to
remove any slack and then lower the
auto cutter.
9 Insert the paper through the paper
outlet and then replace the cover by
reversing the removal steps.
Note: When the paper end mark
appears on the paper, replace
the roll paper before it runs
out.
Fig. 6-16 Paper outlet of the front
cover
Fig. 6-17 Mounting the cover
Paper
outlet
Auto cutter