Filter
Top Products
Rev 0.00
―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications 5-10
• Printer Status
Printer status is the status of the printer sent from the third byte of the automatic status.
Printer status is returned for (transmitted byte count – 2 in Header – 1).
Printer status is always updated for new information. (No log exists.) The following shows the composition of the
status.
<Printer status 1 Printer status (Third Byte)>
Bit Contents Status Model Compatability
“0” “1”
TSP800 TSP700 TSP600 TUP900
7 Fixed at 0 - - - - -
6 OFFLINE By Switch Input No Yes No No No No
5 Cover Status Closed Open OK OK OK OK
4 Fixed at 0 - - - - -
3 ONLINE/OFFLINE Status ONLINE OFFLINE OK OK OK OK
2 Conversion SW Open Closed OK OK OK No
1 <ETB> Command Not Executed Executed OK OK OK OK
0 Fixed at 0 - - - - -
• <ETB> Command
Cleared when received at the host (by clearing bit 1 to 0, automatic status is not targeted to occur).
<Printer status 2 Error Information (Fourth Byte)>
Bit Contents Status Model Compatability
“0” “1”
TSP800 TSP700 TSP600 TUP900
7 Fixed at 0 - - - - -
6
Stopped by high head
temperature
Not stopped Stopped
OK OK OK OK
5 Non-recoverable Error No Yes OK OK OK OK
4 Fixed at 0 - - - - -
3 Auto-cutter Error No Yes OK OK OK OK
2 Mechanical Error No Yes No No No No
1 Not Used (Fixed at 0) - - - -
0 Fixed at 0 - - - - -
<Printer status 3 Error Information (Fifth Byte)>
Bit Contents Status Model Compatability
“0” “1”
TSP800 TSP700 TSP600 TUP900
7 Fixed at 0 - - - - -
6 Overrun Error No Yes OK OK OK OK
5
Command Error (in Page
Mode)
No Yes
OK No No No
4 Fixed at 0 - - - - -
3 BM Error No Yes No No No OK
2 Presenter Paper Jam Error No Yes No No No OK
1 Head Up Error No Yes No No No No
0 Fixed at 0 - - - - -
• Overrun Error
Overrun errors cleared to 0 when returned to host.
Occurs only when using a serial I/F.