Filter
Top Products
Instruction Manual
6
To verify the successful installation of PEXSATA24E:
1.Right-click on My Computer and select Manage.
2.Select Device Manager.
3.Double-click on SCSI and RAID Controller, then double-click Marvell Serial ATA Gen
2 PCI Express Adapter to display driver properties. A message should be displayed
in the dialog box, indicating that the driver has correctly been installed.
Verifying Successful Installation
4. Position the card above the open PCI Express slot, ensuring that the card is properly
aligned with the slot. Insert the card firmly into the slot, distributing force evenly across
the length of the board. Once inserted, secure the card into the adjoining socket
(previously covered by metal bracket, on the rear panel of the computer chassis), using
the correct size screw (if necessary, please consult documentation that accompanied
purchase of computer).
5.Attach PEXSATA24E to the Serial ATA drive, using a SATA (data) cable.
6.Repeat steps 4 and 5 for each remaining hard drive that will be connected (internally)
to PEXSATA24E.
7. Replace the computer cover and re-connect all power to the computer.
8.Power on the computer. Once Windows boots up, the Found New Hardware Wizard
will appear. If the connected drive(s) are running Windows XP (SP1 or earlier) or
Server 2003 (SP1 or later), select No, not this time. Click Next.
9.Insert the Driver CD, and select Install the software automatically (recommended),
then click Next.
10. If the Hardware Installation window pops up, click Continue Anyway, then Finish.
Please note that this driver has been thoroughly tested for stability and compatibility.
11. Click Finish.