Filter
Top Products
Instruction Manual
8
Network Mode IP Mode Description
Bridged N/A
Disables Network Address Translation (NAT) and
bridges the Wireless AP and LAN ports together
Wireless ISP
Static
Connects to an external wireless network (Wireless
ISP) and rebroadcasts as an internal wireless network
(WLAN).
*See Wireless ISP section below for instructions on this
mode
DHCP
PPPoE
Note: Depending on the modes you choose, applicable settings will be enabled/
disabled automatically.
5. Click on the LAN Setup link from the left column and congure your desired IP
Address and DHCP settings for the LAN. Then click the Save button.
6. Select Radio from the left column to congure your Basic wireless settings such as
the SSID, Radio Mode and Transmit Range. Then click the Save button.