Filter
Top Products
8
Use the <UP> and <DOWN> arrow keys to highlight a computer and
the <ENTER> key to select it. Or, you may press <ESCAPE> to exit
OSD and remove the OSD menu from the display; the status window
returns to the display and indicates the currently selected computer or
operating status.
A triangle mark (
►
) to the right of a name indicates the port is
cascaded to a Slave; the number at the left of the triangle mark shows
the number of ports the Slave has, i.e. 8 for SV831DUSBU. The
<ENTER> key brings you one level down and another screen pops
up listing the names of the computers on that Slave. The name of the
Slave will be shown at the upper right corner of the OSD menu. It is
useful to group computers and still be able to see the group name.
An eye mark (
N
) to the right of a name indicates the computer is
selected to be monitored in Scan mode. In OSD, this mark can be
switched on or off by function key <F2>.
Press the <ESCAPE> key to exit the OSD and to return to the selected
computer, The computer name is also shown on the screen.
To edit the name entry of a computer or a Slave. Function key <F1>:
First, use the <UP> and <DOWN> arrow keys to
highlight a channel then press <F1> followed by
name entry. Valid characters are ‘A’~’Z’, ‘0’~’9’ and
the dash character. Lowercase letters are converted
to uppercase ones. Press the <BACKSPACE> key
to delete a letter one at a time. Nonvolatile memory
stores all name entries until you change, even if the
unit is powered down.
To switch the eye mark (Function key <F2>:
N
) of a computer on or off.
First, use the <UP> and <DOWN> arrow keys to
highlight it, then press <F2> to switch its eye mark
on or off. If Scan Type is ’Ready PC + N’, only the
power-on and eye mark selected computers will be
displayed sequentially in Scan mode.
To lock a device (a computer or a Slave) from Function key <F3>:
unauthorized access, use Security. Security
is effective for only one device (a computer or