Filter
Top Products
10
or, press any front button. Scan Type and Scan Rate set the scan
pattern. Scan Type (<F4>: More\Scan Type) determines if scanned
computers must also be eye mark selected. Scan Rate(<F4>: More\
Scan Rate) sets the display interval when a computer is selected
before selecting the next one.
Manual Scan
Scan through power-on computers one by one by keyboard control. You
can type (<F4>: More\Scan Type) to determine if scanned computers
must also be eye mark selected. Press the <UP> arrow key to select
the previous computer and the <DOWN> arrow key to select the next
computer. Press any other key to abort Manual Scan mode.
Scan Type:
Ready PC +
N
: In Scan mode, scans through power-on computers
and those with the eye mark on the selected ports.
Ready PC: In Scan mode, scans through all power-on computers.
N
only: In Scan mode, scans through any N marked computer
regardless of computer power status. Non-volatile memory stores the
Scan Type settngs.
Scan Rate: Sets the duration of a computer displayed in Auto Scan
mode. The options are 3 seconds, 8 seconds, 15 seconds and 30
seconds. The non-volatile memory stores the Scan Rate setting.
Keyboard Speed: StarView KVM offers PS/2 Keyboard typematic
setting that overrides the similar settings in BIOS and in Windows.
Available speed options are Low, Middle, Fast and Faster as 10, 15,
20 and 30 characters/sec respectively. Keyboard settings are stored in
non-volatile memory.
Hotkey Menu: When you hit the left <CTRL> key twice within two
seconds, the Hotkey Menu appears displaying a list of hot-key
commands if this option is On.
The Hotkey Menu can be turned Off if you prefer not to see it when
the left <CTRL> key is hit twice. The non-volatile memory stores the
Hotkey Menu setting.