Filter
Top Products
Instruction Manual
6
Start Auto-scan
Right-click the KVM Switcher icon in the taskbar to evoke the operating menu, then
select Start Auto-scan to activate auto-scanning.
Stop Auto-scan
While auto-scanning, right-click the KVM Switcher icon to evoke the operating menu,
then select Stop Auto-scan to de-activate auto-scanning. Alternatively, you can press
any button on the front panel to stop this function.
KVM Switcher Configuration
Right-click the KVM Switcher icon and select Settings or double-click the icon to bring
up the configuration dialog box.
Fix Audio Port at PC x
Check this option, then select the PC to which you wish to fix the audio/mic channel.
Once selected, the audio/mic channel will be fixed, and become non-switchable.
Auto-scan Period
Select the Auto-scan period from 10 - 60 seconds, available in increments of 5 seconds.
This setting will define the length of time the KVM Switch will wait before switching to the
next PC.
USB Device Sharing
The USB ports on the front panel of the switch are normally used for keyboard and mouse
connections. However, they are USB 2.0 hub ports, and can easily be connected to any
USB devices so that you can easily switch and share the connected devices among the two
connected computers:
To change the command key, simply enter it into the field provided in the Configuration
Dialog Box. Depending on the command key you’ve designated in the KVM Switcher
Software, to switch to PC ‘x’:
Hotkey sequence = Ctrl + Alt + [command key]*
*The default hotkey setting is CTRL + ALT + 1/2 for PCs 1 and 2.You
can also use Scroll Lock + Scroll Lock to switch to the other computer
Please note: If you intend to modify the command key, you have to modify them
on each of the computers computers connected to the switch.