Filter
Top Products
Instruction Manual
10
Auto Scan
In this mode, the KVM Switch automatically switches from one power-on computer to
the next, sequentially, in a xed interval. During AutoScan mode, the OSD displays the
name of the selected computer.
When Auto Scan detects any keyboard or mouse activity, it suspends the scanning
until activity stops; it then resumes with the next computer in sequence.
To abort Auto Scan mode, press the left <CTRL> twice, or, press any front button.
Scan Type and Scan Rate set the scan pattern. Scan Type (<F4>: More\Scan Type)
determines if scanned computers must also be eye mark selected. Scan Rate(<F4>:
More\Scan Rate) sets the display interval when a computer is selected before selecting
the next one.
Manual Scan
Scan through power-on computers one by one by keyboard control. You can type
(<F4>: More\Scan Type) to determine if scanned computers must also be eye mark
selected.
Press the up arrow key (á) to select the previous computer and the down arrow key
(â ) to select the subsequent computer. Press any other key to abort Manual Scan
mode.
Scan Type:
Ready PC + N: In Scan mode, scan through power-on and eye mark
selected computers. The non-volatile memory
stores the Scan Type setting.
Ready PC: In Scan mode, scan through power-on computers.
N only: In Scan mode, scan through any eye-marked computer regardless of
computer power status. The non-volatile memory stores the Scan Type setting.
Scan Rate: Sets the duration of a computer displayed in Auto Scan mode.
The options are 3 seconds, 8 seconds, 15 seconds and 30
seconds. The non-volatile memory stores the Scan Rate
setting.
Hotkey Menu: When you hit the left <CTRL> key twice within two
seconds, the Hotkey Menu appears displaying a list of
hotkey commands if the option is On. The hotkey Menu
can be turned O if you prefer not to see it when the left
<CTRL> key is hit twice. The non-volatile memory stores
the Hotkey Menu setting.