![](http://pdfasset.owneriq.net/9/a1/9a1be43d-191b-4d26-9859-dd38122a1039/9a1be43d-191b-4d26-9859-dd38122a1039-bgb.png)
Instruction Manual
8
3. Connect the IDE board to the Hard Drive Tray by carefully sliding the male-18 pin
parallel connector on the IDE board, into the female 18-pin reciprocal on the Hard
Drive Tray, and replace the screws.
4. Connect the IDE cable, and the 4 pin Power cable from the Hard Drive tray to the the
3.5” IDE Hard Drive.