Filter
Top Products
Instruction Manual
5
on the toolbar.
3. Click the DisplayLink icon.
4. Click StarTech USB3DOCKH2DP.
5. In the drop-down list, click a congurable option.
Each display is congured independently from all of the connected displays.
Note: If you’re using a computer that’s running Windows 7 or Windows 8, you can also
adjust a display device on the Display Settings screen.
About the display options
The following information describes the display congurations available using the
DisplayLink utility.
Extend
Select this option to display an extension of your active Windows desktop on the
display that’s connected to the docking station. When you select this option, you can
view more applications or documents at the same time. The display is extended in the
direction it was the last time that the display was in Extend mode.
For more control, click Extend To and select one of the options. This puts the display
into Extend mode, and places the display to the right or left, above, or below the
primary display.
Mirror
Select this option to display a duplication of the primary display on the display that’s
connected to the docking station. The resolution, color depth, and refresh rate of the
primary display are replicated on the connected display.
Note: When the connected monitor uses a dierent specication than the primary
display, the system’s primary graphics adapter scales all of the settings to a lower
specication to maintain a uniform aspect ratio.
Extend To
Select this option to specify the physical location of the display that’s connected to the
docking station in relation to the system’s primary monitor.
Screen Resolution
Select this option to change the resolution on the display that’s connected to the
docking station.
Screen Rotation
Select this option to change the orientation in which the screen is viewed. The two
most common orientation types are portrait and landscape.