Filter
Top Products
Driver Parameter Values and Definitions
This section describes the parameters and settings for the qfe device driver. Table
C–1 lists these parameters.
TABLE C–1 qfe Driver Parameter, Status, and Descriptions
Parameter Status Description
transceiver_inuse
Read only Defines the current status
link_status
Read only Defines the current status
link_speed
Read only Defines the current status
link_mode
Read only Defines the current status
ipg1
Read and write Inter-packet gap parameter
ipg2
Read and write Inter-packet gap parameter
use_int_xcvr
Read and write Operational mode parameter
pace_size
Read and write Operational mode parameter
adv_autoneg_cap
Read and write Operational mode parameter
adv_100fdx_cap
Read and write Operational mode parameter
adv_100hdx_cap
Read and write Operational mode parameter
adv_10fdx_cap
Read and write Operational mode parameter
adv_10hdx_cap
Read and write Operational mode parameter
autoneg_cap
Read only Local transceiver auto negotiation
capability
100fdx_cap
Read only Local transceiver capability of the
hardware
26 Sun Quad FastEthernet PCI Adapter Installation and User’s Guide ♦ Revision A, August 1997