3-2 Sun StorEdge A3500/A3500FC Hardware Configuration Guide • December 1999
3.1 StorEdge D1000 Disk Array Settings
This section describes how to set attributes for the StorEdge D1000
disk arrays (
FIGURE 3-1) in the following configurations:
■ 1x2—One controller module with two StorEdge D1000 disk arrays
■ 1x5—One controller module with five StorEdge D1000 disk arrays
■ 2x7—Two controller modules with seven StorEdge D1000 disk arrays
■ 3x15—Three controller modules with fifteen StorEdge D1000 disk arrays
For the D1000 disk arrays, you must set the following attributes:
■ Option switch
■ Module ID
■ SCSI jumper cables and terminators
FIGURE 3-1 StorEdge D1000 Disk Array
IN/OUT-1 IN/OUT-1
IN/OUT -2
IN/OUT -2
Option switch
Module ID
Rear