![](http://pdfasset.owneriq.net/0/57/0577c8ef-eca2-4839-bbfe-b1f7602904a9/0577c8ef-eca2-4839-bbfe-b1f7602904a9-bg75.png)
Appendix C Installing the Sun PCI-Express Dual Gigabit Ethernet Device Driver on Linux Platforms 83
▼ To Set e1000 Parameters in a Linux
Environment
1. Remove the Sun PCI-Express Dual Gigabit Ethernet device driver, if it is already
loaded.
2. Load the Sun PCI-Express Dual Gigabit Ethernet device driver:
Or you can use the insmod command:
where VAL1 applies to the first e1000 interface and VAL2 to the next interface and so
on.
# rmmod e1000
# modprobe e1000 option=VAL1, VAL2, . . .
# insmod e1000 option=VAL1, VAL2, . . .