Filter
Top Products
SUNIX NCCI Co., Ltd.
TEL : +886-2-8913-1987
Email : info@sunix-ncci.com.tw
Regulatory Approvals CE, FCC
2. Hardware Installation
This chapter includes information about hardware installation for RS-232 Universal PCI Multi-Port Communication Board.
The following topics are covered:
Hardware Installation
Pin Assignments
2-1. Hardware Installation
The hardware installation of PCI / PCI-E serial boards is easy to carry out. Before inserting the card into the PCI / PCI-E bus,
please follow the detailed steps given below to install the PCI / PCI-E serial board in your computer.
Safety First
To avoid damaging your system and boards, make sure your PC’s power is turned off
before installing PCI/PCI-E card.
Step 1: Turn your PC’s power off, and shut off the power to any peripheral.
Step 2: Remove the power plug from the plug socket.
Step 3: Remove the cover from the computer case.
Step 4: If fitted. Remove the metal cover plate on the rear of a free PCI slot.
Step 5: Insert Universal PCI / PCI-E Multi-Port Communication Board into the free PCI / PCI-E slot and screw it firmly on
the bracket side.
Step 6: Place the cover back onto the computer.
Step 7: Insert the plug into the plug socket.