Filter
Top Products
7-10
A+ SERVER 2042G-TRF/6RF User's Manual
Sredir Memory Display Delay
Use this setting to set the delay in seconds to display memory information.
Options are No Delay, 1 sec, 2 secs and 4 secs.
Hardware Health Confi guration
CPU Overheat Temperature
This setting allows you to specify the type of alarm for CPU overheating. Options
include The Early Alarm and The Default Alarm.
Other items in the submenu are systems monitor displays for the following
information:
CPU1 Temperature, CPU2 Temperature, CPU3 Temperature, CPU4 Tempera-
ture, System Temperature, Fan 1-9 Reading, Chipset FAN1-2, CPU1 VCore,
CPU2 VCore, CPU3 VCore, CPU4 VCore, 3.3V Vcc (V), + 5Vin, +12V Vcc
(V), CPU1~4 DIMM Voltage, Chipset SR56x0 Voltage, 3.3V standby, Battery
Voltage
System Fan Monitor
This submenu contains lists the system fans and contains RPM information for
them.
Fan Speed Control Modes
This submenu allows you to determine how the system will control the speed
of the onboard fans. The options are Full Speed/FS (Max Cooling), Perfor-
mance/PF (Better Cooling), Balanced/BL (Balance between performance and
energy saving), Energy Saving/ES (Lower Power and Noise).
A display also showing the speeds of FAN1 Speed ~ FAN11 Speed is shown
on this page.
ACPI Confi guration
ACPI Aware O/S
Use this setting to enable or disable ACPI support for the operating system if
it supports ACPI. Options include Yes (enable ACPI support) or No (disable
ACPI support).
ACPI Version Features
Use this setting the determine which ACPI version to use. Options are ACPI
v1.0, ACPI v2.0 and ACPI v3.0.