![](http://pdfasset.owneriq.net/6/a0/6a044857-cdeb-3e54-7d20-f46db5bd2646/6a044857-cdeb-3e54-7d20-f46db5bd2646-bg3f.png)
Chapter 6: Advanced Chassis Setup
6-7
Installing/Removing a SATA Drive
To remove a carrier, push the release button located beside the drive LEDs.
Swing the colored handle fully out and use it to pull the unit straight out (see
Figure 6-5).
Note: Your operating system must have RAID support to enable the hot-plug ca-
pability of the SATA drives.
1.
2.
Figure 6-5. Removing a SATA Drive from the Server