Filter
Top Products
2-2
C2SEA/C2SEE User's Manual
2-3 Processor and Heatsink Installation
Warning: When handling the processor package, avoid placing direct
pressure on the label area of the fan.
Notes:
1. Always connect the power cord last and always remove it before add-
ing, removing or changing any hardware components. Make sure that you
install the processor into the CPU LGA 775 socket before you install the
CPU heatsink.
2. The Intel LGA 775 Processor package contains the CPU fan and heat-
sink assembly. If you buy a CPU separately, make sure that you use only
Intel-certifi ed multi-directional heatsink and fan.
4. Make sure to install the motherboard into the chassis before you install
the CPU heatsink and fan.
5. When receiving a motherboard with an LGA 775 Processor pre-installed,
make sure that the CPU plastic cap is in place and none of the CPU pins
are bent; otherwise, contact the retailer immediately. Refer to the MB
Features Section for more details on CPU support.
Installing an LGA 775 Processor
1. Press the load lever to
release the load plate, which
covers the CPU socket, from
its locking position.
Load Lever
2. Gently lift the load lever to
open the load plate.
PnP Cap on
top of the
Load Plate
Load Plate
(with PnP Cap
attached)