Filter
Top Products
2-16
H8QM8-2/H8QME-2 User's Manual
VGA Enable/Disable
JPG1 allows you to enable or disable
the VGA port. The default position is
on pins 1 and 2 to enable VGA. See
the table on the right for jumper set-
tings.
VGA Enable/Disable
Jumper Settings (JPG1)
Jumper Setting Defi nition
Pins 1-2 Enabled
Pins 2-3 Disabled
JLAN Enable/Disable
Change the setting of jumper JPL1
to enable or disable the JLAN1 and
JLAN2 Gb Ethernet ports. See the
table on the right for jumper settings.
The default setting is enabled.
JLAN1/2 Enable/Disable
Jumper Settings (JPL1)
Jumper Setting Defi nition
Pins 1-2 Enabled
Pins 2-3 Disabled
I
2
C to PCI-X Slots Enable/
Disable
The JI
2
C1/2 pair of jumpers allows you
to connect the System Management
Bus to the PCI-X slots. The default
setting is pins 2-3 for both jumpers to
disable the connection. Both connec-
tors must be set the same (JI
2
C1 is for
data and JI
2
C2 is for the clock). See
the table on right for jumper settings.
I
2
C to PCI-X Slots
Enable/Disable
Jumper Settings
(JI
2
C1/2)
Jumper Setting Defi nition
Pins 1-2 Enabled
Pins 2-3 Disabled
I
2
C to PCI-E Slots Enable/
Disable
The JI
2
C3/4 pair of jumpers allows you
to connect the System Management
Bus to the PCI-Express slots. The de-
fault setting is pins 2-3 for both jumpers
to disable the connection. Both con-
nectors must be set the same (JI
2
C3 is
for data and JI
2
C4 is for the clock). See
the table on right for jumper settings.
I
2
C to PCI-E Slots
Enable/Disable
Jumper Settings
(JI
2
C3/4)
Jumper Setting Defi nition
Pins 1-2 Enabled
Pins 2-3 Disabled