SUPER MICRO Computer SBI-7127R-S6 Server User Manual


 
SBI-7127R-S6 Blade Module User’s Manual
1-2
1-3 Blade Module Features
Table 1-1 lists the main features of the SBI-7127R-S6 blade module. See the
proceeding section for components typically included in a blade system and other
optional components. Specific details for the SBI-7127R-S6 blade module are found in
Chapter 4: "Blade Module Features" on page 4-1.
Processors
The SBI-7127R-S6 blade module supports dual 2011-pin Socket R (LGA 2011) E5-2600
series processors.
Refer to the Supermicro web site for a complete listing of supported processors (http://
www.supermicro.com/products/superblade). Please note that you will need to check the
detailed specifications of a particular blade module for a list of the CPUs it supports.
Details on installation of the processor into the SBI-7127R-S6 blade module are found in
Chapter 3: "Setup and Installation" on page 3-1.
Memory
Both the SBI-7127R-S6 blade module have sixteen (16) 240-pin DIMM sockets that can
support up to 512 GB RDIMM or 128 GB UDIMM of DDR3 1600/1333/1066/800 MHz
speed, 32GB, 16GB, 8GB, 4GB, 2GB and 1GB size SDRAM memory. Memory is
interleaved, which requires modules of the same size and speed to be installed in
groups (of two or three).
Please refer to the Supermicro web site for a list of supported memory
(www.supermicro.com/products/superblade). The detailed specifications for a blade
module will contain a link to a list of recommended memory sizes and manufacturers.
Table 1-1. SBI-7127R-S6 Blade Module Specification Features
Mainboard
B9DR7 (proprietary form factor)
Chassis Dimensions (HxWxD): 11.32" x 1.67" x 18.9" (288mm x 42.4mm x
480mm)
Processors
Eight/six/four core Intel
Xeon
®
E5-2600 series 2011-pin processors.
Please refer to our web site for a complete listing of supported processors.
FSB Speed QPI up to 8 GT/s
Chipset Intel C602J
Graphics Controller Integrated Matrox G200 Graphics
BIOS 16 Mb SPI Flash EEPROM with AMI® BIOS
Memory Capacity
Supports up to 512 GB of RDIMM and 128 GB UDIMM SDRAM memory of
DDR3 1600/1333/1066/800 MHz speed and 32GB, 16GB, 8GB, 4GB, 2GB
and 1GB size in sixteen (16) 240-pin DIMM sockets
HDD Controller LSI
2208
®
RAID controller
Hard Drive Bays Includes six hot-swap drive bays for 2.5" SATA/SAS/SSD disk drives