Filter
Top Products
SCF418 Chassis Manual
6-6
Figure 6-4: Installing into a Rack
Stability hazard. The rack stabilizing mechanism must be in place, or the
rack must be bolted to the oor before you slide the unit out for servicing.
Failure to stabilize the rack can cause the rack to tip over.
Note: gures are for illustrative purposes only. Always install servers into racks
from the bottom up.
Chassis Installation
Installing the Chassis into a Rack
1. Conrm that the rails are correctly installed on the rack.
2. Align the bottom of the chassis with the bottom of the rails.
3. Insert the chassis into the rails, keeping the pressure even on both sides,
pushing the chassis into the rack until it clicks into the locked position.
4. Secure the chassis handles to the front of the rack.