SUPER MICRO Computer SSE-G48-TG4 Switch User Manual


  Open as PDF
of 27
 
Release: 1.0c 27 / 27
SupermicroSwitchWebGUIQuickConfigurationGuide
4.4 Configuring Port Channel Parameters
Once a port channel is created and associated with the required ports, you can configure the port
channel parameters.
If necessary configure the MTU of the port channel in the Port Channel page (Fig 14). The default
value is 1500.
If necessary configure the name or description of the port channel in the Port Channel page (Fig
14).
Make the port channel Admin Status as “UP” in the Port Channel page (Fig 14).
Add the port channel to any required vlans in the VLAN page (Fig 12).
 previous