Filter
Top Products
14
Chapter 3. Installing Protocol Drivers from the CD-ROM
Installing Network Drivers (Protocol Drivers)
The protocol drivers are located in the appropriate product directory on the CD-ROM. This directory
is organized into a number of subdirectories for the various operating systems. For instructions on
how to install the drivers please read the relevant Readme files. These files are available as ASCII
text and in HTML format.
Any last-minute changes are documented in the Release Notes and on the SysKonnect driver site on
the Internet.
To install a driver please follow the instructions in the relevant Readme files. Once you have
installed the driver, remember to check that the network connection is functioning correctly.
Viewing Readme Files with an Internet Browser
If you have an internet browser (or any other HTML viewer) installed on your computer we
recommend you use it to view the instructions for installing the drivers.
1. Insert the installation CD-ROM in your CD-ROM drive.
2. If, as is usually the case, the Windows Autorun function is activated (or a similar function in
another operating system) the browser will be automatically launched. You will see the
welcome screen for the installation CD-ROM. If this is not the case, you will have to run the
start.htm file manually from your CD-ROM drive.
3. From the list of various directories, go to the SK-NET GE product family, and from there to the
operating system for which you want to install the network card. Here you will find instructions
on how to install the driver.