Filter
Top Products
SysKonnect SK-9E21D 10/100/1000Base-T Adapter PCI Express
Windows 21
Windows 98 Second Edition
SysKonnect offers an NDIS 5.0 32-bit Miniport driver for the SysKonnect SK-9E21D 10/100/
1000Base-T Adapter, PCI Express, supporting Windows 98 Second Edition
(Windows 98 SE). This driver only supports Windows 98 SE and Windows Me.
With PCI Express adapters, due to the plug & play facility of PCI, Windows 98 SE is able to
find, identify, and configure an adapter automatically.
To install the driver, proceed as follows:
1. After you have installed the adapter in your computer (for details see chapter 1 "Installa-
tion of the Network Adapter"), boot Windows 98 SE.
Windows 98 SE detects the SysKonnect SK-9E21D Adapter as “PCI Ethernet Controller”
during the boot operation.
The window “Add New Hardware Wizard” is displayed.
2. Click N
EXT.
The menu “What do you want Windows to do?” is displayed.
3. Select the check box S
EARCH FOR THE BEST DRIVER FOR YOUR DEVICE (RECOMMENDED).
4. Click N
EXT.
5. Select the source from which the driver is to be installed (e.g. CD-ROM, floppy disk, hard
disk).
6. Select the checkbox S
PECIFY A LOCATION.
7. Type the path to the driver, e.g. e:\SK-9E21D\Windows\Win98SE, where ”e” is the
designation of the CD-ROM drive on your system.
8. Click N
EXT.
The window “Location of driver” is displayed.
9. Click N
EXT.
The menu “Windows has finished installing the software that your new hardware device
requires” is displayed.
10. Click F
INISH.
11. Restart your system.
For more information, refer to the corresponding readme file.
Windows Millennium Edition
SysKonnect offers an NDIS 5.0 32-bit Miniport driver for the SysKonnect SK-9E21D 10/100/
1000Base-T Adapter, PCI Express, supporting Windows Millennium Edition (Windows Me).
This driver only supports Windows Me and Windows 98 SE.
With PCI Express adapters, due to the plug & play facility of PCI, Windows Me is able to find,
identify, and configure an adapter automatically.
To install the driver, proceed as follows:
1. After you have installed the adapter in your computer (for details, see chapter 1 "Installa-
tion of the Network Adapter"), boot Windows Me.
Windows Me detects the SysKonnect SK-9E21D Adapter as “PCI Ethernet Controller”
during the boot operation.
2. Select the check box S
PECIFY THE LOCATION OF THE DRIVER (ADVANCED).
3. Click N
EXT.
4. Select the check box S
EARCH FOR THE BEST DRIVER FOR YOUR DEVICE (RECOMMENDED).
5. Select the source from which the driver is to be installed (e.g. CD-ROM, floppy disk, hard
disk).
6. Select the check box S
PECIFY A LOCATION.