Filter
Top Products
D1372102_T550_MXP_User_Manual
184
5 T.M.D.S.
Data4+
13 T.M.D.S.
Data3+
21 T.M.D.S. Data5+
6 DDC Clock 14 +5V Power 22 T.M.D.S. Clock
Shield
7 DDC Data 15 Ground (return
for +5V, HSync
and VSync)
23 T.M.D.S. Clock+
8 Analog Vertical
Sync
16 Hot Plug Detect 24 T.M.D.S. Clock-
C1 Analog Red C2 Analog Green C3 Analog Blue
C4 Analog
Horizontal
Sync
C5 Analog Ground
(analog, R, G &
B return)
5.1.2 Audio
2 Audio Inputs
1 microphone input (balanced, 24V phantom powered) via XLR connectors.
1 audio input (line level) via RCA connectors.
All audio inputs are active by default. For further information, refer to chapter Audio.
Audio input connector specification:
Connector label Microphone(s) Audio input(s)
Signal type Balanced Unbalanced
Connector (codec) XLR-F, pin 1-gnd,
pin 2 hot, pin 3-
cold/neutral
Female RCA/phono,
sleeve-ground,
centre-signal
Input impedance 2400 ohms (pin 2 -
3)
10K ohms
Max input level when
set to maximum
input level
83 mVpp 15.5 Vpp
Max input level when
set to minimum input
level
6.2 mVpp 1.17 Vpp
Range, menu
adjustable input gain
22.5 dB (16 steps of
1.5 dB)
22.5 dB (16 steps of
1.5 dB)
Phantom power
voltage
24 V +/- 5% -
Phantom power
resistor, pin 2
1200 ohms -
Phantom power
resistor, pin 3
1200 ohms -
Max phantom power
current pr mic
12 mA
-