Filter
Top Products
2
LED behavior
Table 1 describes the behavior of the LEDs.
Table 1: Media2 blade LED behavior
LED Color Indicates
USB Port Activity Green Reserved for future expansion
Admin Port Activity Green Reserved for future expansion
Status Green The Media2 blade is operating normally
Alarm Red The Media2 blade is booting or has
developed a fault, for example:
temperature is outside normal limits
battery failure of the internal clock
Refer to the web interface for more
information about the problem (go to
Status > Health)
Ethernet Port Status, for each
Ethernet port and Admin port:
FDX Green The link has been negotiated as a full-
duplex link
Act Green Packets are being transmitted on this port
Link Green The speed of the link from this port,
which is either 10, 100, or 1000 Mbps
Power Blue The Media2 blade is receiving power from
the MSE 8000 chassis