Filter
Top Products
4
iii Slide out the blade or blanking blade.
2 Open both retaining latches on the front of the Media2 blade. When open, a
retaining latch is at a 90
° angle perpendicular to the front of the blade.
3 Slide the Media2 blade into the blade slot (as shown in Figure 2) until it stops.
4 Simultaneously close both retaining latches on the blade (thereby engaging the
connectors at the rear of the blade) to secure in the chassis as shown in Figure 3.
5 Using a No.1 Phillips screwdriver, tighten the screws in the retaining latches
with a clockwise quarter turn.
The power is connected automatically as soon as you close the latches. The LCD
panel displays messages as parts are checked and eventually you see "Waiting for
application to boot" after which the Codian logo appears.
Figure 2: Inserting a blade into the chassis