Filter
Top Products
TARGUS USB 2.0 DVD/CD-RW SLIM EXTERNAL DRIVE
NOTES: The Targus drive receives its power from your computer’s USB ports. You
must have a minimum of two USB ports to use the drive, they must be in full
compliance with the USB specifications and supply a minimum of 5V/500mA of power
per port.
When connected to USB version 1.1 ports, the drive’s performance level will be less
than optimal. For best results, connect the drive to USB version 2.0 ports.
This drive will read DVD-ROMs as delivered, but in order to play DVD movies, you must
have movie playback software (not included) installed on your system.
Operating System
• Windows® Me/2000/XP
Connecting the Drive and Installing the Drivers
NOTES: Installing the Targus drive may change internal drive letter assignments.
You can connect the Targus drive to your computer via a hub or port replicator as long
as the device has its own AC power adapter.
The Y-cable that connects the Targus drive to your computer has two
USB type A connector ends, one single and one with a USB pass-
through.
The USB pass-through connector supports both up- and downstream
data flow between your computer and any supported device connected
to it, such as a USB mouse or port replicator. The single connector
supports both up- and downstream data flow between the Targus drive
and your computer. Both connector ends provide power to the Targus
drive.
CAUTIONS: Avoid connecting a high power device, such as a printer or scanner, to your
computer via the Y-cable’s pass-through end as the device may not work properly
and/or cause the Targus drive to stop working temporarily. For best results, connect
only low power devices, such as a mouse or keyboard, to the passthrough end.
2