Filter
Top Products
TARGUS USB 2.0 DVD/CD-RW SLIM EXTERNAL DRIVE
Hot Swapping
You can connect and disconnect the Targus drive while the computer is
running. When connecting the Targus drive, first connect the Type A
connectors of the Y-cable and then connect the Type B connector.
When disconnecting the drive, disconnect the Type B connector first,
followed by both Type A connectors.
Writing and Rewriting CDs
To write and rewrite CDs, you must install writing software. For your
convenience, a CD writing application is supplied. To install the CD
writing software:
1 Insert the supplied CD-ROM into the Targus drive (or your
computer’s internal CD-ROM drive if it has one).
2 If setup does not begin automatically, click Start, then Run, and enter
D:\setup.exe (where D: is the path of the CD-ROM drive) and
click OK.
3 Follow the on-screen instructions to complete installation.
For more information on how to use the CD writing application, refer to
the documentation on the CD-ROM.
Things to Remember
Operating Hints
• Never press the eject button while the Targus drive is accessing a
disc.
• The Targus drive operates in either an upright or horizontal
position. To prevent possible damage, avoid changing the drive’s
position while it is in use.
• Avoid using or storing the Targus drive in extreme temperatures.
The environmental specifications while operating are 50-113
degrees F (10-45 degrees C).
• After transporting the Targus drive, allow it to reach room
temperature before using it.
6