Filter
Top Products
23
NOTE
1
Place the
Original
23
Number of
Copies
4
Press
START
Select the Custom
Size (M1/F3 or M2/F4)
Upper-
left
corner
Platen
■■
■■
■ Manual Skyshot Mode
When using this function, the custom size should be registered into memory (M1, M2) in
advance. (See page 29)
Other Features
2
∗
The default size for M1 is: 70(X) × 160(Y) mm, and M2 is: 95(X) × 220(Y) mm
CWhen changing the M1 or M2 size, consult with the key operator.
CWhen using the manual skyshot mode, M1 and M2 are turned ON and other
job memory cannot be used.
CPress the RESET key to cancel all job settings.
FUNCTION MODE (1-2)
ENTER NO. OR ∨ ∧
2:COPIER SETTINGS
PRESS SET TO SELECT
COPIER PARAM. (00-14)
ENTER NO. OR ∨ ∧
07 MANUAL SKYSHOT
2:M1 ON
#Press the 2 key to select COPIER SETTINGS.
$Press the SET key.
%Press 7 and SET key to select MANUAL SKYSHOT.
&
Press 2 or 3 key to select the Custom Size.
1: OFF NONE
2: M1 ON M1 size is ON*
3: M2 ON M2 size is ON*
4: M1, M2 ON Both sizes are ON
(Press the SET key.
)Press the Reset key.
Making Copies