Filter
Top Products
21
Print Settings
1 Set up your document according to the procedures for your
application. See “Supported Page Sizes and Print Area” on
page 9.
2 Load the paper or other media on which you want to print in
the correct tray. See “Loading Media Trays” on page 11 and
“Specialty Media” on page 14.
3 When printing from the multi-purpose tray, select the Media
Size and then the Media Type when prompted by the
printer’s front panel. See “Specialty Media” on page 14.
4 From your application, make the appropriate print settings,
including:
■ Page Size See “Supported Page Sizes and Print
Area” on page 9.
■ Color Correction See “TekColor™ Color Corrections”
on page 23.
■ Print Quality (resolution/monochrome vs. color)
See “Print Quality Modes” on page 22.
■ Source/Paper Source Make the correct tray
selection. See “Media Types and Trays” on page 7.
The location of settings varies depending on the application and
the print driver you use. For Macintosh users, most features are
found in either the Page Setup, Document Setup, or Print menus.
For Windows users, print features are located in the tabs,
properties, and options of the Page Setup and Print dialog boxes.
Print Settings