Filter
Top Products
Real Technical Support
As with any Teledyne product, you are one phone call
away from assistance with Model 9950. Whether in the
field or in the factory, a Teledyne Field Service Engineer
can assist with questions. Simply refer to the phone
numbers below for a Teledyne representative in your
area. Also, the instruction manual included with every
product offers quick reference for any process required of
the 9950. Clear, easy-to-read instructions with charts and
illustrations guide every step of the process to assure
accurate results and maximum safety.
Teledyne Analytical Instruments
World Leader in Gas and Liquid Analysis
With over 40 years of analytical instrument experience,
Teledyne supplies sensors, custom engineered
analyzers and complete monitoring systems to satisfy
unique applications.
Optional remote display unit available
Specifications
Operating Temperature: 0-50°C; not to be used for more than 8
hours above 40°C
Digital Outputs: Measured and stored data; RS-232 serial
interface, 1200 baud rate; 8 data bits;
1 stop bit; no parity
User Interface: LCD; 30 characters wide by 7 lines;
5 soft keys; menu-driven program
Fuels: 15 User selectable
Natural gas
No. 2 fuel oil
No. 4 fuel oil
No. 6 fuel oil
Anthracite coal
Bituminous coal
Lignite coal
Kerosene
Propane
Butane
Wood chips - 50%H
2O
Wood chips - 0% H2O
Coke oven gas
Blast furnace gas
Sewer gas
Power Requirements: AC power mains and/or internal battery;
90-255 VAC at 50-60 Hz; rechargeable
12VDC battery; low battery indicator on
LCD display (8 hours on one charge)
Data Logging: Archives up to 99 tests
Probe: 316 stainless steel; K-type thermocouple;
3/8" OD; 13" / 33cm insertion length;
10' / 3m neoprene hose
Printer: 2-1/4" / 5.7cm wide thermal paper, line
feed button
Packaging: Suitcase-type, heavy-duty aluminum
case. Case holds probe, 10' / 3m hose
and instruction manual.
Dimensions: 18" W x 13"D x 6" H
45.7cm W x 33cm D x 15.25cm H
Weight (approx.): 27 lbs. / 12.27 kg
Warranty
Instrument is warranted for 1 year against defects in material
or workmanship
NOTE: Specifications and features will vary with application. The above are
established and validated during design, but are not to be construed as test
criteria for every product. All specifications and features are subject to change
without notice.
© 1998 Teledyne Analytical Instruments, A Teledyne Technologies Company.
All rights reserved. Printed in the USA.
5/98LD
Regional Office
Tokyo, Japan ..............................................81-33-239-9090
TELEDYNE
ANALYTICAL INSTRUMENTS
A Teledyne Technologies Company
16830 Chestnut Street
City of Industry, California 91748, USA
TEL: 626-934-1500 FAX: 626-934-1651
TOLL FREE: 888-789-8168
Visit Our Web Site at:
www.teledyne-ai.com