Telit Wireless Solutions GE863-QUAD Network Card User Manual


 
GE863-QUAD
GE863-PY
1vv0300715 Rev. 1 - 19/09/06
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Right reserved page 9 of 79
Pin Signal I/O Function Internal
Pull up
Type
59
GPIO17 I/O GPIO CMOS 2.8V
60
GPIO14 I/O GPIO -
61
RESERVED - RESERVED -
62
RESERVED - RESERVED -
63
DAC_OUT O DAC out
64
GPIO16 I/O GPIO CMOS 2.8V
65
RESERVED - RESERVED -
66
RESERVED - RESERVED -
67
GND - Ground Power
68
RESERVED - RESERVED -
69
GND - Ground Power
70
ADC_IN3 AI Analog / Digital converter input -
71
GPIO15 I/O GPIO -
72
GND - Ground Power
73
RESERVED - RESERVED -
74
ADC_IN2 AI Analog / Digital converter input -
75
RESERVED - RESERVED - -
76
GPIO18 I/O GPIO -
77
GND - Ground Power
78
RESERVED - RESERVED -
79
GND - Ground Power
80
RESERVED - RESERVED -
(1) For the exclusive use of the Technical Support Service
(2) When activating the Easy camera these pins will not be available for other use
(3) On this pin a maximum of 10nF bypass capacitor is allowed.
(4) Available only on GE863-PY