Filter
Top Products
Related Documentation
www.ti.com
3.6 Bill of Materials
Table 4. Bill of Materials
Count RefDes Value Description Size Part Number Manufacturer
2 J1, J3 – USB Connector Type A – AU-Y1005 Assmann Electronics Inc
Molex / Waldom
3 J2, J4, J5 – USB Connector Type B – 67068-9000
Electronics
100 mil x Sullins Connector
3 J6, J7, J8 – Header, 2x1pin, 100mil spacing PEC36SAAN
100 mil Solutions
2 C1, C4 1.0 μF Capacitor, Ceramic, 1.0uF, X7R, 10% 805 Std Std
1 C2 10 nF Capacitor, Ceramic, 10nF, X7R, 10% 805 Std Std
1 C3 2.2 μF Capacitor, Ceramic, 2.2uF, X7R, 10% 805 Std Std
2 R1, R2 10 kΩ Resistor, Chip, 10kΩ, 1/8W, 5% 805 Std Std
1 R3 100 kΩ Resistor, Chip, 100kΩ, 1/8W, 5% 805 Std Std
TS3USB221/A/ TS3USB221RSER/
1 U1 IC, High Speed 1:2 USB Switch RSE TI
E TS3USB221xRSER
1 U2 LP2985-33 IC, 150mA LDO regulator SOT23-5 LP2985-33DBV TI
4 Related Documentation
TS3USB221 High-Speed USB 2.0 (480Mbps) 1:2 Multiplexer/Demultiplexer Switch with Single Enable
data sheet (SCDS220F)
TS3USB221A ESD Protected, High-Speed USB 2.0 (480Mbps) 1:2 Multiplexer/Demultiplexer Switch with
Single Enable data sheet (SCDS277)
TS3USB221E High-Speed USB 2.0 (480Mbps) 1:2 Multiplexer/Demultiplexer Switch with Single Enable
and IEC Level 3 ESD Protection data sheet (SCDS263)
USB 2.0 Board Design and Layout Guidelines application report (SPRAAR7)
High Speed USB Platform Design Guidelines, Intel, 2000,
http://www.intel.com/technology/usb/download/usb2dg_R1_0.pdf
USB 2.0 Specification, Intel, 2000, http://www.usb.org/developers/docs
14
TS3USB221/A/E High Speed USB 2.0 (480 Mbps) 1:2 Multiplexer/Demultiplexer SCDU001A–July 2009–Revised October 2009
Switch Evaluation Module
Submit Documentation Feedback
Copyright © 2009, Texas Instruments Incorporated