Filter
Top Products
RamSan-325/325c User’s Manual - 67 -
6.2 Adding LUNs
The RamSan allows the administrator to add LUNs through the Text
Management Interface and the web interface.
6.2.1 Via Web Interface
To add LUN(s) via the web interface:
• Click on the “Management Control Processor” graphic
• Click on the “LUN Config” tab
• Click the “New LUN” button
• Select a “LUN number” from the drop-down box
• Enter the “Device ID”
• Adjust the “LUN size” using the scroll bar
• Assign links to FC ports (see Section 6.4 – Linking LUNs to/from
Fibre Channel Controllers)
• Assign LUN masks (see Section 6.7 – Managing Access Lists)
• Set backup mode (see Section 6.9 – Setting Backup Mode)
• Click the “OK” button
• The system adds the specified LUN.
Figure 6-3: Adding LUNs via the Web Interface