Filter
Top Products
32
DHCP Configuration
A DHCP server can be configured to assign IP addresses to devices connected to
the LAN port. To configure these ports, choose LAN from the Network menu.
DHCP Configuration
Item Description
DHCP Server Enable or disable the DHCP server to automatically assign IP
address to PCs connected to the LAN interface.
Start IP Specifies the starting IP address of the DHCP range.
End IP Specifies the ending IP address of the DHCP range.
DNS Server Specifies the DNS server IP address.
Web Services Configuration
From the Network menu, choose the
Service item, and the Web Service screen
appears. This screen displays the service
support parameters of the system. You can
change any of these items and press Apply
to confirm your settings. A description of
each item follows:
Web Service
Item Description
HTTP (WebDisk)
Support
Enable or disable WebDisk support. Enter the port number if this
option is enabled.
HTTPs (Secure
WebDisk) Support
Enable or disable secure WebDisk support. Enter the port if this
option is enabled.
SMB/CIFS Enable or Disable SMB/CIFS protocol for Windows, Apple, Unix
drive mapping.
UPnP Enable or disable Universal Plug and Play protocol. UPnP helps to
find the IP address of the 1U4500.
NOTE
The IP Segment of WAN and LAN should not overlap.
WARNING
The IP address of the LAN interface should not be in the range of the Start IP
address and End IP address.
NOTE
• Disable HTTP support and Enable Secure HTTP support to guarantee secure
access.
• In some environments, due to security concerns, you may wish to disable
SMB/CIFS as a precaution against computer viruses.