Filter
Top Products
Stowaway Travel Mouse Owner’s Manual Page 5
Installing and Configuring the Mouse for PPC
Before You Begin
Before you install the Stowaway keyboard and mouse software for Windows
Mobile 2003-compatible PDAs:
¾ Disable or remove any other keyboard/mouse applications that
you have previously installed on your Pocket PC device. (Refer to
the User’s Guide included with your Pocket PC device for instruction on
how to do this.)
¾ Ensure there is at least 400 KB of memory on your Pocket PC device. To
check the available memory, tap Start ÎSettingsÎSystemÎMemory.
¾ Insert the 2 AAA batteries (included) beneath the battery cover of the
Stowaway Travel Mouse and switch to ON.
Installing the Software
1. Connect your Pocket PC device to a computer using the docking cradle or
sync cable.
2.
Establish a connection between the computer and your Pocket PC device
using ActiveSync
®
and then backup the data stored on the Pocket PC
device.
3. Insert the CD enclosed with your mouse and follow the on-screen
instructions to successfully install the software.
NOTE: The driver must be installed in Main Memory to function
properly.
4. Tap the on-screen button to reset your Pocket PC device to complete the
installation.
5. After the driver is successfully installed and the Pocket PC device is reset,
the keyboard and mouse driver icons will show up in the Programs
window.
NOTE: The Bluetooth connection between the PDA and keyboard
must be set up through the Stowaway keyboard/mouse driver.