![](http://pdfasset.owneriq.net/e/80/e8022463-4a9d-49dc-88a9-c2e2b2f57d91/e8022463-4a9d-49dc-88a9-c2e2b2f57d91-bgf.png)
7
E-DOC-CTC-20051017-0142 v1.0
Chapter 1
Getting to know your SpeedTouch™
1.2.2 Access via CLI
To access the
SpeedTouch™ via the
Command Line
Interface (CLI)
You can access the Command Line Interface (CLI) via:
A Telnet session
This requires a TCP/IP connection between the host from which the Telnet
session is opened and the SpeedTouch™. Your SpeedTouch™ and the
connected computer must have an IP address in the same subnet.
Quote site commands (over FTP)
For more information, see “ Quote site command” on page 11.
For more information on CLI commands, see the SpeedTouch™ CLI Reference
Guide.