![](http://pdfasset.owneriq.net/2/7d/27d91a7a-62b9-4701-95ed-0944d64eaf1a/27d91a7a-62b9-4701-95ed-0944d64eaf1a-bg1d0.png)
E-DOC-CTC-20061027-0003 v2.0
IP Commands
442
EXAMPLE:
=>ip iflist
Interface Group MTU RX TX TX-Drop Status HW-address
0 loop local 65535 123966 75177 0 [UP] 00:0e:50:0f:fc:2c
1 Internet wan 1500 0 0 0 DOWN
2 RtPPPoE_ppp wan 1500 0 0 0 DOWN
3 LocalNetwork lan 1500 86589 125262 0 [UP] 00:0e:50:0f:fc:2c
4 myIPintf wan 1500 0 0 0 DOWN 00:0e:50:0f:fc:2c
=>ip ifconfig
intf = myIPintf
[mtu] = 1500
[status] = up
[hwaddr] = 00:0e:50:0f:fc:2c
[group] = wan
[linksensing] = enabled
[primary] = enabled
:ip ifconfig intf=myIPintf
=>ip iflist
Interface Group MTU RX TX TX-Drop Status HW-address
0 loop local 65535 123966 75177 0 [UP] 00:0e:50:0f:fc:2c
1 Internet wan 1500 0 0 0 DOWN
2 RtPPPoE_ppp wan 1500 0 0 0 DOWN
3 LocalNetwork lan 1500 86589 125262 0 [UP] 00:0e:50:0f:fc:2c
4 myIPintf wan 1500 0 0 0 [UP] 00:0e:50:0f:fc:2c
=>
i
If the STATUS is shown between square brackets, then linksensing is disabled for that particular
interface.