Filter
Top Products
3EC 36714 BAAA TCZZA Ed. 01
4 SpeedTouch™ for Mac OS
24
4 A Welcome screen appears that describes the steps in the installation process:
Click Install to proceed.
5 During installation a screen shows the installation progress.
At the end of the installation procedure, the following screen appears:
Click OK to proceed.
6 Plug the ADSL cable, provided in your package, into the inline receptacle of
the SpeedTouch™. Plug the other end of the ADSL cable into the wall socket
terminating ADSL service.
Note: Depending onto which pins of the wall socket the ADSL signals are
assigned, it might be necessary to plug in an RJ11 interchanger into the wall
socket prior to connect the ADSL cable.
7 Plug the SpeedTouch™'s USB connector into the computer's USB port.
An USB port can be easily located, it is marked with the typical USB symbol:
8 A dialog box appears to announce that the installer has finished installation:
As no further installation is required for the SpeedTouch™, click Quit to leave
the installer.
Step Action