Topcom WBR 7011 B Network Router User Manual


 
Topcom Wireless Broadband Router WBR 7011b 3
Topcom Wireless Broadband Router WBR 7011b
ENGLISH
1 THE CONNECTION PANEL
* POWER 12V DC: The power port is to connect the 12 V DC
(1000mA) power adapter.
--> The power LED on the front panel will go ON when the power
adapter is connected.
* WAN: The WAN Ethernet port is to connect your ASDL/Cable
modem.
--> The WAN LED will go ON if the network Ethernet cable is
properly connected.
* Ports 1- 4: This is to connect networked devices, such as PCs, ftp
servers or anything else you want to put on your network.
--> The LAN LED’s will indicate the connection status.
* Reset Button: If you would like to load default settings, press the
reset button and hold it for at least 4 seconds. It will load the factory
default settings for the device. Do not press the reset button unless
you want to clear the current data.
1Z VDC
WAN Reset
1234
Skr7011b.book Page 3 Thursday, August 19, 2004 11:17 AM