Filter
Top Products
English
5
Setup the Broadband Router
o PPPoE xDSL: Used for DSL bridge with PPPoE connection.
- IP Address info for PPPoE xDSL -
1 Username: Enter your PPPoE username.
2 Password: Enter your password.
3 Service Name: Enter the service name (for example the name of your Internet
Provider)
4 MTU: Enter the MTU size (If the size is not specified by your Internet Provider,
please leave the default value at 1492)
5 Connection type:
• Continuous: The PPP-connection will always be active.
• Connect on Demand: The PPP-connection will establish when a
computer is accessing the Internet. The PPP connection will disconnect
when there is no more Internet traffic during the Idle Time (minutes),
entered in the field below.
• Manual: The PPP connection is established / disconnected manually by
clicking Connect / Disconnect.
JClick OK to proceed. (Go to “ Finishing the Broadband Connection Type Setup Wizard”
on page 8)