Toshiba 1135 Series Laptop User Manual


 
92
Learning the Basics
Using Standby
5.375 x 8.375 ver 2.3
The computer saves the state of all open programs and files to
memory, turns off the display, and goes into a low-power
mode. The on/off light ( ) blinks amber indicating the
machine is in Standby mode.
If you are using the Windows
®
XP Pro operating system and
are a member of a domain, power off the computer using the
Standby command as follows:
1 Click Start, then Shut down.
The Shut Down window appears.
Sample Stand by computer window
2 Select Stand by from the drop-down list of options.
3 Click OK.
The computer saves the state of all open programs and files to
memory, turns off the display, and goes into a low-power
mode. The on/off light blinks amber to indicate the machine
is in Standby mode.
NOTE: If you power down using the Standby command and the
battery discharges fully, your information will be lost. Be sure to
save your work often.
Going into Standby mode more quickly
In addition, you can put the computer into Standby mode by
either pressing the power button or closing the display panel.