Filter
Top Products
1 PREPARATION
38 Preparation 2 - Placing Copy Paper
Recommended paper
To ensure the best copy performance, TOSHIBA recommends the paper types listed below. If
you want to use paper other than that we recommend, contact your service technician.
*1 Be sure to use the overhead transparencies that TOSHIBA recommends. When transparencies other
than the TOSHIBA-recommended ones are used, this could cause an equipment malfunction.
Paper types not acceptable
Do not use the types of paper listed below since they may cause paper jams.
y Damp paper
y Creased paper
y Wrinkled paper or paper prone to be curled
y Paper whose surface is extremely smooth or rough
Do not use the types of paper listed below since they may cause an equipment malfunction.
y Paper whose surface is specially treated
y Paper once printed with other copiers or printers
Storing paper
Observe the following cautions when storing copy paper:
y Wrap copy paper in its wrapping paper to prevent it from gathering dust.
y Do not expose copy paper to direct sunlight.
y Store copy paper in a damp-free place.
y Store copy paper on a flat surface to prevent it from being creased or bent.
Media type Product name
Plain paper TIDAL / Hammermill 20 lb. Bond
THICK PAPER 1 Laser / Hammermill 24 lb. Bond
THICK PAPER 2 Laser / Hammermill 32 lb. Bond
Exact Index / WAUSAU 90 lb. Index
Tracing paper Tracing paper / Ostrich International 20 lb. Bond only
Sticker labels 5165 / Avery
Transparencies
*1
X-10.0 / Folex